Wireless RC Robot with Arduino and XBees
In this tutorial,we will expand on the SIK for RedBot to control a robot wirelessly with XBee radios!We'll explore a different microcontroller and wirelessly control the RedBot at a distance.Beware,we'll need to solder the wireless controller together.
To follow along with this tutorial,you will need the following materials.You may not need everything though depending on what you have.Add it to your cart,read through the guide,and adjust the cart as necessary.
You will need a soldering iron,solder,andgeneral soldering accessories.If you have not soldered before,we suggest looking at thetool kits.You will also need a wire stripper and some wire depending on the XBees that you are using.
If you aren't familiar with the following concepts,we recommend checking out these tutorials before continuing.